org.swift.common.cli.CliClient$ClientException: 1 actions failed, 8 actions were successful from file: E:\CLI\ppaTestScript.txt

JIRA | Peter Adams | 7 months ago
tip
Your exception is missing from the Samebug knowledge base.
Here are the best solutions we found on the Internet.
Click on the to mark the helpful solution and get rewards for you help.
  1. 0

    To try and avoid dropping history rather than deleting a plan and recreating I was trying to leave the the plan in place but remove and recreate the internals. This appears to trigger bad behaviour when a job is recreated. Completely deleting the plan and recreating resets to good. To see the problem run the following.. --action createPlan --plan TEST-T1 --name TestName --project TestProject --action addStage --plan TEST-T1 --stage "Test Stage" --action addJob --plan TEST-T1 --stage "@stage@" --job "Default Job" --action removeStage --plan TEST-T1 --id -1 --action addStage --plan TEST-T1 --stage "Test Stage" --action addJob --plan TEST-T1 --stage "@stage@" --job "Default Job" This gives the result Run: --action createPlan --plan TEST-T1 --name TestName --project TestProject Plan TEST-T1 created with name 'TestName'. Run: --action addStage --plan TEST-T1 --stage "Test Stage" Stage 'Test Stage' added to plan TEST-T1. Run: --action addJob --plan TEST-T1 --stage "Test Stage" --job "Default Job" Job DEFAULTJOB added to stage 'Test Stage' in plan TEST-T1. Run: --action removeStage --plan TEST-T1 --id -1 Stage 'Test Stage' removed from plan TEST-T1. 1 stages removed. # Remake stage and job. Run: --action addStage --plan TEST-T1 --stage "Test Stage" Stage 'Test Stage' added to plan TEST-T1. Run: --action addJob --plan TEST-T1 --stage "Test Stage" --job "Default Job" Remote error: Hibernate flushing: Could not execute JDBC batch update; uncategorized SQLException for SQL [insert into BUILD (CREATED_DATE, UPDATED_DA TE, FULL_KEY, BUILDKEY, TITLE, DESCRIPTION, SUSPENDED_FROM_BUILDING, MARKED_FOR_DELETION, OID, PROJECT_ID, MASTER_ID, REQUIREMENT_SET, STAGE_ID, BUILD _TYPE, BUILD_ID) values (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, 'JOB', ?)]; SQL state [null]; error code [0]; failed batch; nested exception is java.s ql.BatchUpdateException: failed batch Client error: 1 actions failed, 5 actions were successful from file: E:\CLI\ppaTestFail.txt Is it possible that removing the stage does not correctly remove the contained jobs? I could be wrong but it feels like it should. My original use case also gave the exception as below. I'm not sure why my canned example above didn't Remote error: Hibernate flushing: Could not execute JDBC batch update; uncategorized SQLException for SQL [insert into BUILD (CREATED_DATE, UPDATED_D TE, FULL_KEY, BUILDKEY, TITLE, DESCRIPTION, SUSPENDED_FROM_BUILDING, MARKED_FOR_DELETION, OID, PROJECT_ID, MASTER_ID, REQUIREMENT_SET, STAGE_ID, BUIL _TYPE, BUILD_ID) values (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, 'JOB', ?)]; SQL state [null]; error code [0]; failed batch; nested exception is java. ql.BatchUpdateException: failed batch org.swift.common.cli.AbstractRemoteClient$RemoteRestException: Hibernate flushing: Could not execute JDBC batch update; uncategorized SQLException fo SQL [insert into BUILD (CREATED_DATE, UPDATED_DATE, FULL_KEY, BUILDKEY, TITLE, DESCRIPTION, SUSPENDED_FROM_BUILDING, MARKED_FOR_DELETION, OID, PROJE T_ID, MASTER_ID, REQUIREMENT_SET, STAGE_ID, BUILD_TYPE, BUILD_ID) values (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, 'JOB', ?)]; SQL state [null]; error ode [0]; failed batch; nested exception is java.sql.BatchUpdateException: failed batch at org.swift.common.cli.AbstractRestClient.printErrorMessages(AbstractRestClient.java:293) at org.swift.common.cli.AbstractRestClient.restRequestWithUrlConnection(AbstractRestClient.java:719) at org.swift.common.cli.AbstractRestClient.restRequestWithFullUrl(AbstractRestClient.java:573) at org.swift.common.cli.AbstractRestClient.restRequestWithFullUrl(AbstractRestClient.java:544) at org.swift.common.cli.AbstractRestClient.restRequest(AbstractRestClient.java:519) at org.swift.common.cli.AbstractRestClient.restRequest(AbstractRestClient.java:507) at org.swift.common.cli.AbstractRestClient.restRequest(AbstractRestClient.java:491) at org.swift.bamboo.cli.AppfireClientForBamboo.addJob(AppfireClientForBamboo.java:141) at org.swift.bamboo.cli.helpers.PlanHelper.addJob(PlanHelper.java:862) at org.swift.bamboo.cli.BambooClient.handleRequest(BambooClient.java:711) at org.swift.common.cli.AbstractRemoteClient.process(AbstractRemoteClient.java:448) at org.swift.common.cli.CliClient.doWork(CliClient.java:454) at org.swift.common.cli.CliClient.doWork(CliClient.java:521) at org.swift.common.cli.CliClient.doWork(CliClient.java:517) at org.swift.common.cli.CliClient.processRunLine(CliClient.java:1253) at org.swift.common.cli.AbstractRemoteClient.processRunLine(AbstractRemoteClient.java:777) at org.swift.common.cli.CliClient.doSingleRunLine(CliClient.java:1225) at org.swift.common.cli.CliClient.run(CliClient.java:1086) at org.swift.bamboo.cli.BambooClient.handleRequest(BambooClient.java:528) at org.swift.common.cli.AbstractRemoteClient.process(AbstractRemoteClient.java:448) at org.swift.common.cli.CliClient.doWork(CliClient.java:454) at org.swift.bamboo.cli.BambooClient.main(BambooClient.java:252) Client error: 1 actions failed, 8 actions were successful from file: E:\CLI\ppaTestScript.txt org.swift.common.cli.CliClient$ClientException: 1 actions failed, 8 actions were successful from file: E:\CLI\ppaTestScript.txt at org.swift.common.cli.CliClient.run(CliClient.java:1159) at org.swift.bamboo.cli.BambooClient.handleRequest(BambooClient.java:528) at org.swift.common.cli.AbstractRemoteClient.process(AbstractRemoteClient.java:448) at org.swift.common.cli.CliClient.doWork(CliClient.java:454) at org.swift.bamboo.cli.BambooClient.main(BambooClient.java:252)

    JIRA | 7 months ago | Peter Adams
    org.swift.common.cli.CliClient$ClientException: 1 actions failed, 8 actions were successful from file: E:\CLI\ppaTestScript.txt
  2. 0

    When running run action to perform templated actions, getting an error difficult to decipher during action "addRepository". Creating a repository from scratch each time since each build plan needs a unique branch and there are many distinct repos. *Command being enacted in the Windows terminal:* {code:java} bamboo -v --action run --file bamboo_project_template.txt --findReplace "#PROJECT#:ENGLISHIVV13CID4160,#NAME#:"English-IV-v13-GS-4160",#WEBDAV#:educator_englishIV_v13_2_gs,#BRANCH#:gs_master_v13,#CLONEURL#:English%%20IV {code} *Template txt file being used:* {code:java} # Create a new project based on a template project --action cloneProject --project GE --toProject #PROJECT# # --name "#NAME#" # Add VSO/Git Repository --action addRepository --plan #PROJECT#-PRE --repositoryKey "GIT" --repository "VSO #WEBDAV#" --field1 repository.git.repositoryUrl --value1 https://flvs.visualstudio.com/DefaultCollection/cs/_git/#CLONEURL# --field2 repository.git.branch --value2 "#BRANCH#" --field3 repository.git.username --value3 "iceteam" --field4 repository.git.password --value4 "4bw5rngxkdklwww5xxxxxxxxxxxxxgar==xxxxxxxxxxxxxsg7mhn2ykmq" # Add a script task to PRE --action addTask --build #PROJECT#-PRE --job "default" --taskKey "CHECKOUT" --fields "argument:pubplan" --field1 "Repository" --value1 "VSO #WEBDAV#" --action addTask --build #PROJECT#-PRE --job "default" --taskKey "SCRIPT" --fields "argument:pubplan" --field1 "scriptLocation" --value1 "FILE" --field2 "scriptFile" --value2 "C:\Users\admin\Desktop\cwRsync_5.5.0_x86_Free\rsync_pub2.bat" --field3 "Argument" --value3 "${bamboo.buildKey} #WEBDAV#" {code} *CLI output pasted below:* {code:java} C:\Users\admin\Desktop\bamboo-cli-5.2.0>bamboo_action.bat C:\Users\admin\Desktop\bamboo-cli-5.2.0>bamboo -v --action run --file bamboo_project_template.txt --findReplace "#PROJECT#:ENGLISHIVV13CID4160,#NAME#:"English-IV-v13-GS-4160",#WEBD AV#:educator_englishIV_v13_2_gs,#BRANCH#:gs_master_v13,#CLONEURL#:English%20IV Server address: http://127.0.0.1:8085 Response code: 200, message: OK, url: http://127.0.0.1:8085/rest/org.swift.bamboo.cli/latest/validatelicense? # Create a new project based on a template project Run: --action cloneProject --project GE --toProject ENGLISHIVV13CID4160 Server address: http://127.0.0.1:8085 URL requested: http://127.0.0.1:8085/rest/api/latest/project/GE? Request type: GET Content type: application/json Response code: 200, message: OK, url: http://127.0.0.1:8085/rest/api/latest/project/GE? URL requested: http://127.0.0.1:8085/rest/api/latest/project/GE?&expand=plans.plan&max-results=100&start-index=0 Request type: GET Content type: application/json Response code: 200, message: OK, url: http://127.0.0.1:8085/rest/api/latest/project/GE?&expand=plans.plan&max-results=100&start-index=0 URL requested: http://127.0.0.1:8085/rest/api/latest/project?&max-results=2147483647 Request type: GET Content type: application/xml Response code: 200, message: OK, url: http://127.0.0.1:8085/rest/api/latest/project?&max-results=2147483647 Looking for project ENGLISHIVV13CID4160: AGV3 Looking for project ENGLISHIVV13CID4160: C1VG Looking for project ENGLISHIVV13CID4160: EIVG Looking for project ENGLISHIVV13CID4160: MLAVG Looking for project ENGLISHIVV13CID4160: MUHV3G Looking for project ENGLISHIVV13CID4160: MWHVG4 Looking for project ENGLISHIVV13CID4160: P1VG Looking for project ENGLISHIVV13CID4160: GE URL requested: http://127.0.0.1:8085/build/admin/create/performClonePlan.action?&planKeyToClone=GE-PRE&chainName=pubplan&projectKey=ENGLISHIVV13CID4160&chainKey=PRE&clonePlan=true& bamboo.successReturnMode=json&save=Create&projectName=ENGLISHIVV13CID4160&chainDescription=&tmp.createAsEnabled=true&existingProjectKey=newProject Request type: POST Content type: application/json Response code: 200, message: OK, url: http://127.0.0.1:8085/build/admin/create/performClonePlan.action?&planKeyToClone=GE-PRE&chainName=pubplan&projectKey=ENGLISHIVV13CID4160&chain Key=PRE&clonePlan=true&bamboo.successReturnMode=json&save=Create&projectName=ENGLISHIVV13CID4160&chainDescription=&tmp.createAsEnabled=true&existingProjectKey=newProject URL requested: http://127.0.0.1:8085/rest/api/latest/plan/ENGLISHIVV13CID4160-PRE? Request type: GET Content type: application/json Response code: 200, message: OK, url: http://127.0.0.1:8085/rest/api/latest/plan/ENGLISHIVV13CID4160-PRE? Plan ENGLISHIVV13CID4160-PRE created based on GE-PRE. 1 plans cloned from GE to ENGLISHIVV13CID4160. # --name "English-IV-v13-GS-4160" # Add VSO/Git Repository Run: --action addRepository --plan ENGLISHIVV13CID4160-PRE --repositoryKey "GIT" --repository "VSO educator_englishIV_v13_2_gs" --field1 repository.git.repositoryUrl --value1 https ://flvs.visualstudio.com/DefaultCollection/cs/_git/English%20IV --field2 repository.git.branch --value2 "gs_master_v13" --field3 repository.git.username --value3 "iceteam" --field4 repository.git.password --value4 "4bw5rngxkdklxxxxxxxxxxxxxxxxxxxxxxxx7mhn2ykmq" Server address: http://127.0.0.1:8085 URL requested: http://127.0.0.1:8085/rest/api/latest/plan/ENGLISHIVV13CID4160-PRE?&expand=plans.plan Request type: GET Content type: application/json Response code: 200, message: OK, url: http://127.0.0.1:8085/rest/api/latest/plan/ENGLISHIVV13CID4160-PRE?&expand=plans.plan URL requested: http://127.0.0.1:8085/chain/admin/config/editChainRepository.action?&buildKey=ENGLISHIVV13CID4160-PRE Request type: GET Content type: text/html Response code: 200, message: OK, url: http://127.0.0.1:8085/chain/admin/config/editChainRepository.action?&buildKey=ENGLISHIVV13CID4160-PRE URL requested: http://127.0.0.1:8085/rest/api/latest/plan/ENGLISHIVV13CID4160-PRE? Request type: GET Content type: application/json Response code: 200, message: OK, url: http://127.0.0.1:8085/rest/api/latest/plan/ENGLISHIVV13CID4160-PRE? URL requested: http://127.0.0.1:8085/chain/admin/config/createRepository.action?&confirm=true&selectedRepository=com.atlassian.bamboo.plugins.atlassian-bamboo-plugin-git%3Agit&repo sitory.git.username=iceteam&bamboo.successReturnMode=json&repositoryId=0&planKey=ENGLISHIVV13CID4160-PRE&repository.git.branch=gs_master_v13&repository.git.password=***&repository. git.repositoryUrl=https%3A%2F%2Fflvs.visualstudio.com%2FDefaultCollection%2Fcs%2F_git%2FEnglish%2520IV&repositoryName=VSO+educator_englishIV_v13_2_gs Request type: POST Content type: application/json Response code: 200, message: OK, url: http://127.0.0.1:8085/chain/admin/config/createRepository.action?&confirm=true&selectedRepository=com.atlassian.bamboo.plugins.atlassian-bambo o-plugin-git%3Agit&repository.git.username=iceteam&bamboo.successReturnMode=json&repositoryId=0&planKey=ENGLISHIVV13CID4160-PRE&repository.git.branch=gs_master_v13&repository.git.p assword=***&repository.git.repositoryUrl=https%3A%2F%2Fflvs.visualstudio.com%2FDefaultCollection%2Fcs%2F_git%2FEnglish%2520IV&repositoryName=VSO+educator_englishIV_v13_2_gs Remote error: unknown org.swift.common.cli.AbstractRemoteClient$RemoteRestException: unknown at org.swift.bamboo.cli.helpers.RepositoryHelper.addOrUpdateRepository(RepositoryHelper.java:197) at org.swift.bamboo.cli.BambooClient.handleRequest(BambooClient.java:713) at org.swift.common.cli.AbstractRemoteClient.process(AbstractRemoteClient.java:443) at org.swift.common.cli.CliClient.doWork(CliClient.java:454) at org.swift.common.cli.CliClient.doWork(CliClient.java:521) at org.swift.common.cli.CliClient.doWork(CliClient.java:517) at org.swift.common.cli.CliClient.processRunLine(CliClient.java:1253) at org.swift.common.cli.AbstractRemoteClient.processRunLine(AbstractRemoteClient.java:772) at org.swift.common.cli.CliClient.doSingleRunLine(CliClient.java:1225) at org.swift.common.cli.CliClient.run(CliClient.java:1086) at org.swift.bamboo.cli.BambooClient.handleRequest(BambooClient.java:525) at org.swift.common.cli.AbstractRemoteClient.process(AbstractRemoteClient.java:443) at org.swift.common.cli.CliClient.doWork(CliClient.java:454) at org.swift.bamboo.cli.BambooClient.main(BambooClient.java:253) Client error: 1 actions failed, 1 actions were successful from file: C:\Users\admin\Desktop\bamboo-cli-5.2.0\bamboo_project_template.txt org.swift.common.cli.CliClient$ClientException: 1 actions failed, 1 actions were successful from file: C:\Users\admin\Desktop\bamboo-cli-5.2.0\bamboo_project_template.txt at org.swift.common.cli.CliClient.run(CliClient.java:1159) at org.swift.bamboo.cli.BambooClient.handleRequest(BambooClient.java:525) at org.swift.common.cli.AbstractRemoteClient.process(AbstractRemoteClient.java:443) at org.swift.common.cli.CliClient.doWork(CliClient.java:454) at org.swift.bamboo.cli.BambooClient.main(BambooClient.java:253) C:\Users\admin\Desktop\bamboo-cli-5.2.0> {code}

    JIRA | 11 months ago | George Meyer
    org.swift.common.cli.CliClient$ClientException: 1 actions failed, 1 actions were successful from file: C:\Users\admin\Desktop\bamboo-cli-5.2.0\bamboo_project_template.txt
  3. 0

    When running run action to perform templated actions, getting an error difficult to decipher during action "addRepository". Creating a repository from scratch each time since each build plan needs a unique branch and there are many distinct repos. *Command being enacted in the Windows terminal:* {code:java} bamboo -v --action run --file bamboo_project_template.txt --findReplace "#PROJECT#:ENGLISHIVV13CID4160,#NAME#:"English-IV-v13-GS-4160",#WEBDAV#:educator_englishIV_v13_2_gs,#BRANCH#:gs_master_v13,#CLONEURL#:English%%20IV {code} *Template txt file being used:* {code:java} # Create a new project based on a template project --action cloneProject --project GE --toProject #PROJECT# # --name "#NAME#" # Add VSO/Git Repository --action addRepository --plan #PROJECT#-PRE --repositoryKey "GIT" --repository "VSO #WEBDAV#" --field1 repository.git.repositoryUrl --value1 https://flvs.visualstudio.com/DefaultCollection/cs/_git/#CLONEURL# --field2 repository.git.branch --value2 "#BRANCH#" --field3 repository.git.username --value3 "iceteam" --field4 repository.git.password --value4 "4bw5rngxkdklwww5xxxxxxxxxxxxxgar==xxxxxxxxxxxxxsg7mhn2ykmq" # Add a script task to PRE --action addTask --build #PROJECT#-PRE --job "default" --taskKey "CHECKOUT" --fields "argument:pubplan" --field1 "Repository" --value1 "VSO #WEBDAV#" --action addTask --build #PROJECT#-PRE --job "default" --taskKey "SCRIPT" --fields "argument:pubplan" --field1 "scriptLocation" --value1 "FILE" --field2 "scriptFile" --value2 "C:\Users\admin\Desktop\cwRsync_5.5.0_x86_Free\rsync_pub2.bat" --field3 "Argument" --value3 "${bamboo.buildKey} #WEBDAV#" {code} *CLI output pasted below:* {code:java} C:\Users\admin\Desktop\bamboo-cli-5.2.0>bamboo_action.bat C:\Users\admin\Desktop\bamboo-cli-5.2.0>bamboo -v --action run --file bamboo_project_template.txt --findReplace "#PROJECT#:ENGLISHIVV13CID4160,#NAME#:"English-IV-v13-GS-4160",#WEBD AV#:educator_englishIV_v13_2_gs,#BRANCH#:gs_master_v13,#CLONEURL#:English%20IV Server address: http://127.0.0.1:8085 Response code: 200, message: OK, url: http://127.0.0.1:8085/rest/org.swift.bamboo.cli/latest/validatelicense? # Create a new project based on a template project Run: --action cloneProject --project GE --toProject ENGLISHIVV13CID4160 Server address: http://127.0.0.1:8085 URL requested: http://127.0.0.1:8085/rest/api/latest/project/GE? Request type: GET Content type: application/json Response code: 200, message: OK, url: http://127.0.0.1:8085/rest/api/latest/project/GE? URL requested: http://127.0.0.1:8085/rest/api/latest/project/GE?&expand=plans.plan&max-results=100&start-index=0 Request type: GET Content type: application/json Response code: 200, message: OK, url: http://127.0.0.1:8085/rest/api/latest/project/GE?&expand=plans.plan&max-results=100&start-index=0 URL requested: http://127.0.0.1:8085/rest/api/latest/project?&max-results=2147483647 Request type: GET Content type: application/xml Response code: 200, message: OK, url: http://127.0.0.1:8085/rest/api/latest/project?&max-results=2147483647 Looking for project ENGLISHIVV13CID4160: AGV3 Looking for project ENGLISHIVV13CID4160: C1VG Looking for project ENGLISHIVV13CID4160: EIVG Looking for project ENGLISHIVV13CID4160: MLAVG Looking for project ENGLISHIVV13CID4160: MUHV3G Looking for project ENGLISHIVV13CID4160: MWHVG4 Looking for project ENGLISHIVV13CID4160: P1VG Looking for project ENGLISHIVV13CID4160: GE URL requested: http://127.0.0.1:8085/build/admin/create/performClonePlan.action?&planKeyToClone=GE-PRE&chainName=pubplan&projectKey=ENGLISHIVV13CID4160&chainKey=PRE&clonePlan=true& bamboo.successReturnMode=json&save=Create&projectName=ENGLISHIVV13CID4160&chainDescription=&tmp.createAsEnabled=true&existingProjectKey=newProject Request type: POST Content type: application/json Response code: 200, message: OK, url: http://127.0.0.1:8085/build/admin/create/performClonePlan.action?&planKeyToClone=GE-PRE&chainName=pubplan&projectKey=ENGLISHIVV13CID4160&chain Key=PRE&clonePlan=true&bamboo.successReturnMode=json&save=Create&projectName=ENGLISHIVV13CID4160&chainDescription=&tmp.createAsEnabled=true&existingProjectKey=newProject URL requested: http://127.0.0.1:8085/rest/api/latest/plan/ENGLISHIVV13CID4160-PRE? Request type: GET Content type: application/json Response code: 200, message: OK, url: http://127.0.0.1:8085/rest/api/latest/plan/ENGLISHIVV13CID4160-PRE? Plan ENGLISHIVV13CID4160-PRE created based on GE-PRE. 1 plans cloned from GE to ENGLISHIVV13CID4160. # --name "English-IV-v13-GS-4160" # Add VSO/Git Repository Run: --action addRepository --plan ENGLISHIVV13CID4160-PRE --repositoryKey "GIT" --repository "VSO educator_englishIV_v13_2_gs" --field1 repository.git.repositoryUrl --value1 https ://flvs.visualstudio.com/DefaultCollection/cs/_git/English%20IV --field2 repository.git.branch --value2 "gs_master_v13" --field3 repository.git.username --value3 "iceteam" --field4 repository.git.password --value4 "4bw5rngxkdklxxxxxxxxxxxxxxxxxxxxxxxx7mhn2ykmq" Server address: http://127.0.0.1:8085 URL requested: http://127.0.0.1:8085/rest/api/latest/plan/ENGLISHIVV13CID4160-PRE?&expand=plans.plan Request type: GET Content type: application/json Response code: 200, message: OK, url: http://127.0.0.1:8085/rest/api/latest/plan/ENGLISHIVV13CID4160-PRE?&expand=plans.plan URL requested: http://127.0.0.1:8085/chain/admin/config/editChainRepository.action?&buildKey=ENGLISHIVV13CID4160-PRE Request type: GET Content type: text/html Response code: 200, message: OK, url: http://127.0.0.1:8085/chain/admin/config/editChainRepository.action?&buildKey=ENGLISHIVV13CID4160-PRE URL requested: http://127.0.0.1:8085/rest/api/latest/plan/ENGLISHIVV13CID4160-PRE? Request type: GET Content type: application/json Response code: 200, message: OK, url: http://127.0.0.1:8085/rest/api/latest/plan/ENGLISHIVV13CID4160-PRE? URL requested: http://127.0.0.1:8085/chain/admin/config/createRepository.action?&confirm=true&selectedRepository=com.atlassian.bamboo.plugins.atlassian-bamboo-plugin-git%3Agit&repo sitory.git.username=iceteam&bamboo.successReturnMode=json&repositoryId=0&planKey=ENGLISHIVV13CID4160-PRE&repository.git.branch=gs_master_v13&repository.git.password=***&repository. git.repositoryUrl=https%3A%2F%2Fflvs.visualstudio.com%2FDefaultCollection%2Fcs%2F_git%2FEnglish%2520IV&repositoryName=VSO+educator_englishIV_v13_2_gs Request type: POST Content type: application/json Response code: 200, message: OK, url: http://127.0.0.1:8085/chain/admin/config/createRepository.action?&confirm=true&selectedRepository=com.atlassian.bamboo.plugins.atlassian-bambo o-plugin-git%3Agit&repository.git.username=iceteam&bamboo.successReturnMode=json&repositoryId=0&planKey=ENGLISHIVV13CID4160-PRE&repository.git.branch=gs_master_v13&repository.git.p assword=***&repository.git.repositoryUrl=https%3A%2F%2Fflvs.visualstudio.com%2FDefaultCollection%2Fcs%2F_git%2FEnglish%2520IV&repositoryName=VSO+educator_englishIV_v13_2_gs Remote error: unknown org.swift.common.cli.AbstractRemoteClient$RemoteRestException: unknown at org.swift.bamboo.cli.helpers.RepositoryHelper.addOrUpdateRepository(RepositoryHelper.java:197) at org.swift.bamboo.cli.BambooClient.handleRequest(BambooClient.java:713) at org.swift.common.cli.AbstractRemoteClient.process(AbstractRemoteClient.java:443) at org.swift.common.cli.CliClient.doWork(CliClient.java:454) at org.swift.common.cli.CliClient.doWork(CliClient.java:521) at org.swift.common.cli.CliClient.doWork(CliClient.java:517) at org.swift.common.cli.CliClient.processRunLine(CliClient.java:1253) at org.swift.common.cli.AbstractRemoteClient.processRunLine(AbstractRemoteClient.java:772) at org.swift.common.cli.CliClient.doSingleRunLine(CliClient.java:1225) at org.swift.common.cli.CliClient.run(CliClient.java:1086) at org.swift.bamboo.cli.BambooClient.handleRequest(BambooClient.java:525) at org.swift.common.cli.AbstractRemoteClient.process(AbstractRemoteClient.java:443) at org.swift.common.cli.CliClient.doWork(CliClient.java:454) at org.swift.bamboo.cli.BambooClient.main(BambooClient.java:253) Client error: 1 actions failed, 1 actions were successful from file: C:\Users\admin\Desktop\bamboo-cli-5.2.0\bamboo_project_template.txt org.swift.common.cli.CliClient$ClientException: 1 actions failed, 1 actions were successful from file: C:\Users\admin\Desktop\bamboo-cli-5.2.0\bamboo_project_template.txt at org.swift.common.cli.CliClient.run(CliClient.java:1159) at org.swift.bamboo.cli.BambooClient.handleRequest(BambooClient.java:525) at org.swift.common.cli.AbstractRemoteClient.process(AbstractRemoteClient.java:443) at org.swift.common.cli.CliClient.doWork(CliClient.java:454) at org.swift.bamboo.cli.BambooClient.main(BambooClient.java:253) C:\Users\admin\Desktop\bamboo-cli-5.2.0> {code}

    JIRA | 11 months ago | George Meyer
    org.swift.common.cli.CliClient$ClientException: 1 actions failed, 1 actions were successful from file: C:\Users\admin\Desktop\bamboo-cli-5.2.0\bamboo_project_template.txt
  4. Speed up your debug routine!

    Automated exception search integrated into your IDE

    Root Cause Analysis

    1. org.swift.common.cli.CliClient$ClientException

      1 actions failed, 8 actions were successful from file: E:\CLI\ppaTestScript.txt

      at org.swift.common.cli.CliClient.run()
    2. org.swift.common
      CliClient.run
      1. org.swift.common.cli.CliClient.run(CliClient.java:1159)
      1 frame
    3. org.swift.bamboo
      BambooClient.handleRequest
      1. org.swift.bamboo.cli.BambooClient.handleRequest(BambooClient.java:528)
      1 frame
    4. org.swift.common
      CliClient.doWork
      1. org.swift.common.cli.AbstractRemoteClient.process(AbstractRemoteClient.java:448)
      2. org.swift.common.cli.CliClient.doWork(CliClient.java:454)
      2 frames
    5. org.swift.bamboo
      BambooClient.main
      1. org.swift.bamboo.cli.BambooClient.main(BambooClient.java:252)
      1 frame